Diameter control for extruded products: Simply efficient!
EXTRULINE
EXTRULINE Laser Measuring Systems are particularly suitable for the diameter control of extruded products such as plastic tubing, sections, electric cables and other similar products.
Thanks to a perfect balance between straightforward operation and advanced performance, EXTRULINE Systems represent today’s ideal solution for extrusion automation.
In addition to the diameter measurement and tolerance checking, Extruline.X can provide the automatic extrusion process regulation, detect and locate diameter flaws all along the product’s length.
With non contact technology it is possible to measure moving products, hot or soft, where conventional instruments cannot be used and may even damage the product.
Two instruments in one: diameter controller and flaw detector.
Extruding at the lower limits of tolerance means significant savings in materials.
The automatic control capability saves labour costs.
Non-contact measurement for the on-line application and 100% control.
Improvement in product quality and reduction of waste.
Flaw-free products with assessed quality
- Measurement and display the external diameter;
- Out-of-tolerance alarms
- Regulation of the extrusion process
- Flaw detection and location along the spool
- Processing and printing of statistical reports
- Interfacing with a remote computer
Available Single Axis Systems
EXTRULINE.X40
Measuring Field: 40 mmMeasurable Diameters: from 0.1 to 38 mm
Repeatability: up to ± 0.1 µm
EXTRULINE.X80
Measuring Field: 80 mmMeasurable Diameters: from 0.75 to 78 mm
Repeatability: up to ± 0.3 µm
EXTRULINE.X150
Measuring Field: 150 mmMeasurable Diameters: from 0.8 to 149 mm
Repeatability: up to ± 0.6 µm
Available Dual Axis Systems
EXTRULINE.XY13
Measuring Field: 13x13 mmMeasurable Diameters: from 0.3 to 10 mm
Repeatability: up to ± 0.08 µm
EXTRULINE.XY35
Measuring Field: 35x35 mmMeasurable Diameters: from 0.2 to 32 mm
Repeatability: up to ± 0.2 µm
