The Laser Micrometer to Check Full Carbide Tools and Blanks
SUPER-MECLAB TOOLS
The SUPER-MECLAB+.T40 Bench Top Laser Micrometer is a high precision instrument for ultra-high accuracy diameter measurements of fluted part, with odd or even flutes.
It is ideal for the off-line checking of drill bits, end mills, cutting tools, toothed pulleys, small gears.
In addition it can be also used to check the diameter and the ovality of hard metal blanks, ground pins or cylinders.
SUPER-MECLAB+.T ideal for the lab: most performing, with automatic rotation, uses an embedded PC.
This is the most performing and sophisticated instrument, as it uses an embedded PC to process the measurement data.
- Unique for checking odd fluted parts!
- No error due to the hysteresis (inversion error) which is typical of all dial indicator gauges
- Contactless measurement: no part damage or scratches
- Objective and highly reproducible results: no matter about the operator’s skillness
- Extremely easy and quick to use: reduce inspection time and improve measurement capability
- Highly flexible: different components and sizes can be measured without system pre-setting or re-mastering
- Ultra accurate: measure to an accuracy that before you could only get in a metrology room, using much more expensive equipment and specialized personnel
Available Super-Meclab+.T Systems
SUPER-MECLAB+.T40
Measuring Field: 40 mmMeasurable Diameters: from 0.6 to 38 mm
Repeatability: up to ± 0.1 µm
SUPER-MECLAB+.T40 is a high precision instrument for ultra-high accuracy diameter measurements of fluted part, with odd or even flutes. It is ideal for the off-line checking of drill bits, end mills, cutting tools, toothed pulleys, small gears.
