プレス記事
SMALL-PART METROLOGY
ARTICLE FROM MANUFACTURING ENGINEERING, JANUARY 2008 ISSUE
This article deals with the PicoThruvar through-the-spindle in-process ID measuring head for diameters down to 1 mm, air gages for deep holes, optical gages for OD down to 0.5 mm, the Mida OP32 compact probing system, the Mida Laser 75 Pico non contact tool-checking system and the M39s scanning system for OD and ID smaller than 1 mm.
Frank Powell and Sharad Mundra, product managers for the PRODAR Division and MIDA Division in Marposs Corp., Auburn Hills, Mich., interviewed by Manufacturing Engineering.
...
Read the Small-Part Metrology article, that first appeared in the January 2008 issue of Manufacturing Engineering Magazine.
Copyright Notice: 2008 Copyright by Society of Manufacturing Engineers. All rights retained. This article may only be viewed or printed one (1) time for personal use. User may not save any text or graphical items to hard drives or duplicate this article in whole or in part in any medium. This article appears with permission from Manufacturing Engineering®, the official publication of the Society of Manufacturing Engineers (SME). www.sme.org.